Quick Answer: What Screws To Use For Shelving?

How far into stud should screw go?

You should use screws long enough to engage the stud one half the length of the screw.

For example, if the wallboard is 5/8″ thick and the bracket is 1/8″ thick then you want a screw that is at least 1–1/2″ long..

Are you supposed to drill into studs?

Once you find the stud, get out your power drill. … A large bit shouldn’t be used when drilling into a stud since the stud is strong enough to support the weight of your hanging items without special hardware. Insert the drill and pull it out slowly once you’ve made your hole into the stud.

What happens if you drill into a stud?

Once you find the stud, get out your power drill. … A large bit shouldn’t be used when drilling into a stud since the stud is strong enough to support the weight of your hanging items without special hardware. Insert the drill and pull it out slowly once you’ve made your hole into the stud.

What screws to use for Ikea shelves?

Make sure the wood screws you buy are the right size for your shelves. The IKEA wall shelves we bought were ¾ inch thick, so we got screws that were 8 5/8”.

How much weight can a screw in stud hold?

between 80 and 100 poundsA screw in a stud can hold between 80 and 100 pounds. Be sure to distribute the weight across as many as you can. The easiest way to increase the amount of weight a screw in a stud can hold is to simply double up.

How big of a hole can you drill in a 2×4?

Drilling. Any stud shall be permitted to be bored or drilled, provided that the diameter of the resulting hole is not more than 60 percent of the stud width, the edge of the hole is not more than 5/8 inch (16 mm) to the edge of the stud, and the hole is not located in the same section as a cut or notch.

Can you hang a shelf without a stud?

You can just go ahead and screw right into the stud. … If there isn’t a stud, you’ll definitely want to install wall anchors so your shelf is sturdy and able to hold more weight. You can find wall anchors in various weight limits at your local hardware store. You’ll be installing a total of four anchors into your wall.

How much is a stud finder?

This item Stud Finder Wall Scanner – 4 in 1 Electric Wood Detector, Sensor Wall Scanner with LCD Display, Beam Finder Center Finding & Sound Warning for Wood AC Wire Metal Studs Detection (Black)Add to CartCustomer Rating4.5 out of 5 stars (3369)Price$2599ShippingFREE Shipping. Details1 more row

What screws to use for shelves?

For heavy loads we’d recommend 38 mm or 50 mm screws as these have a strong fixing and don’t need wall plugs. The screws should be the heaviest gauge that the holes in the bracket will take. This is usually a 4 mm gauge on small brackets and 5 mm or 5.5 mm on larger ones.

How do you hang shelves with screws?

Remove the screws and put the first bracket into place. If the shelf is on the heavier side and you weren’t able to find a stud, install a wall anchor. Re-insert screws into the brackets and tighten until each bracket is secure. When screwing the brackets into place, make sure not to over-tighten them.

How long should screws be for 2×4?

The most common screw for joining two-by-fours is hardened steel, structural, No. 9, 2 1/2 inches long with a Phillips head. Other screw types appropriate for studs are specialized and may be harder to find and more expensive. It’s important that the screw is designated as a structural screw or a deck screw.

How much weight can a 1/2 inch screw hold?

Instead, the load is a function of its cross-sectional area. A typical range for proof strength for steel is 50 to 100 kpsi (i.e., a screw with a 1 square inch cross-sectional area of steel can hold up to 50,000 to 100,000 pounds).

What kind of screws go into studs?

Drywall screws (sometimes called sheetrock screws) provide a stronger hold, but cost a bit more than nails. These usually feature a Phillips head. Coarse drywall screws feature coarse threads to secure gypsum boards to studs. Fine drywall screws feature smaller heads and are used to secure drywall to metal studs.

Can I use drywall screws for shelves?

For denser shelving or heavier display or storage items, you can use a stud finder to see if there’s stud in the area you want to hang the shelf. Wall studs offer additional support, but if there are none available, you can also use drywall anchors.

Do shelves need to go into studs?

Hollow-Wall Anchors: How to Hang Something on the Wall Without a Stud. Whether fastening a framed picture, mirror, shelf, or curtain rod to a wall, it’s always best to screw or nail directly into a wall stud. Unfortunately, studs are seldom, if ever, positioned exactly where you need them, but that’s okay.